Loading ...
Loading ...
Loading ...
Wall Length Property
Like wall area, wall length is practically impossible to calculate automatically
when body modifiers are present. Because of this, the Wall Length property
returns only the distance between the start point and endpoint of the wall.
To get a more accurate report for the length of a wall, you may have to
reposition the endpoint of the wall.
The visible length of a wall may differ from the distance between the endpoints
due to wall cleanups.
Slab and Roof Slab Volume Properties
Volumes for slabs and roof slabs do not include the volumes of fascias or
soffits.
Slab and Roof Slab Elevation Properties
Slabs and roof slabs have the following elevation properties:
■Elevation—High
■Elevation—Low
These properties provide the highest and lowest elevation value of all slab and
roof slab vertices, including fascias and soffits.
Door Size Properties
Values for the dimension properties of Width, Height, and Thickness can be
combined in 3 additional Door Size properties. The table below shows how
these properties appear for a number of different doors, each with a width of
3'-0", a height of 6'-8", and a thickness of 2", but differing in the number and
size of individual door panels.
Uneven DoorDouble DoorSingle DoorProperty
3'-0"x6'-8"3'-0"x6'-8"3'-0"x6'-8"Door Size - W x H
2'-0"(1'-0")x6'-8"2@1'-6"x6'-8"3'-0"x6'-8"Door Size - 2 @ W x
H
3790 | Chapter 49 Schedules and Display Themes
Loading ...
Loading ...
Loading ...