Loading ...
Loading ...
Loading ...
5 Click OK.
Changing the Orientation of an Opening to a Wall
Use this procedure to change the vertical orientation of an opening in a wall
to which the openings are anchored.
1 Select the opening you want to change, and click Opening
tab ➤ Anchor panel ➤ Settings .
Alternatively, you can access anchor settings on the Properties
palette.
2 Enter the X and Z rotation angles of the openings.
3 Indicate if you want to reverse the flip direction of the opening
in the X, Y or Z axes:
Then…If you want to…
select Flip X.reverse the direction of the opening
select Flip Z.reverse the top and bottom of the
opening
select Flip Y.reverse the position of the opening
in the side of the wall
4 Click OK.
Changing the Location of an Opening
Use this procedure to relocate a freestanding opening by changing the
coordinate values of its insertion point. The opening also has an orientation
with respect to the world coordinate system (WCS) or the current user
coordinate system (UCS). For example, if the top and bottom of the opening
are parallel to the XY plane, its normal is parallel to the Z axis. You can change
the orientation of the opening by aligning its normal with another axis. You
can also rotate the opening on its plane by changing the rotation angle.
1 Double-click the opening, and on the Properties palette, expand
Basic, and expand Location.
2 Click Additional information.
2058 | Chapter 26 Openings
Loading ...
Loading ...
Loading ...