Loading ...
Loading ...
Loading ...
Alternatively, you can access anchor settings on the Properties
palette.
2 Select the reference point for the anchor along the Z axis:
Then…If you want to…
under Position Vertical (Z), select
Bottom of wall height for From.
use the bottom of the wall height
as the reference point
under Position Vertical (Z), select
Center of wall height for From.
use the center of the wall height as
the reference point
under Position Vertical (Z), select
Top of wall height for From.
use the top of the wall height as the
reference point
3 Enter the distance from the reference point at which to place the
openings.
Use a negative value to measure from endpoint to start point.
4 Select the position of the openings to measure to:
Then…If you want to…
select Sill of object for To.measure to the bottom of the
openings in wall
select Center of object for To.measure to the center of the open-
ings in walls
select Head of object for To.measure to the top of the openings
in walls
5 Click OK.
Changing the Position of an Opening Within a Wall
Use this procedure to change the horizontal position of openings within a
wall to which the openings are anchored.
You can also change the position of the opening within a wall using the
Location grip. For more information, see Using Grips to Edit Openings on
page 2046.
2056 | Chapter 26 Openings
Loading ...
Loading ...
Loading ...