Loading ...
Loading ...
Loading ...
NOTE To have the converging point on the edge of the stair, you
must clear the Use Riser Lines setting. See Specifying the Stair Winder
Style Settings on page 2272 for more information about this setting.
6 When you have finished editing the flight length, you can click
the Exit Edit Turns grip to return to the default stair edit mode,
or right-click and click Deselect All to turn off grips.
Aligning a Tread Edge with a Winder Turn Center
Use this procedure to align a Single Point winder style tread edge with a winder
turn center.
The winders within the turn zone are set to an angle converging on the Turn
Center grip.
1 Select a 1/2 turn or 1/4 turn stair.
2 If the Winder Style is balanced, select the circular Edit Turns trigger
grip. The Select Winder Style dialog box is displayed.
NOTE Only the winder styles present in the drawing are displayed.
Select Winder Style dialog box
3 Select a Single Point style from the list, and click OK.
Editing Winders | 2185
Loading ...
Loading ...
Loading ...