Loading ...
Loading ...
Loading ...
Then…If you want to…
select Center, Left, Right, or Auto
for Side for Offset. (Side for Offset
specify the side of the post for the
offset, based on the direction the
stair (or railing) was drawn is available only when there is an
offset value.)
Auto is useful only for railings attached to the edges of stairs. A
positive value is toward the center of the stair, while a negative
value is toward the outside edge. Side for Offset for handrails also
has a selection of Both, so you can specify a handrail on both
sides of the railing.
If you select Auto, and the railing is not attached to a stair or is
along the center of a stair, the offset is to the right.
8 Click OK.
Specifying the Bottom Rails of a Railing Style
Use this procedure to change the following settings for bottom rails in a railing
style:
â– number of bottom rails
â– distance between rails
â– height of lowest rail
1 Select a railing.
2 Click Railing tab ➤ General panel ➤ Edit Style
drop-down ➤ Railing Styles .
3 Select the style you want to edit.
4 Click the Rail Locations tab.
2332 | Chapter 28 Railings
Loading ...
Loading ...
Loading ...