Loading ...
Loading ...
Loading ...
TIP You can select the associative dimension points later and offset them
from their original position on the wall.
Dimensioning the outer length of a building with non-associative points
1 Select an AEC dimension tool, and verify that OSNAP is turned off.
2 Enter p (Pick Points) on the command line and press ENTER.
3 Specify two points in the drawing you want to dimension, press ENTER,
and place the AEC dimension.
The points you selected are not associative to the walls in the building.
If you move the walls, you have to move the location points accordingly
to bring the dimension up to date.
3376 | Chapter 43 AEC Dimensions
Loading ...
Loading ...
Loading ...