Loading ...
Loading ...
Loading ...
NOTE Alternatively, click Home tab ➤ Section & Elevation
panel ➤ Horizontal Section.
2 Specify the first point of the section plane.
3 Specify the second corner of the section plane.
4 Specify the elevation of the section plane, and press ENTER.
5 Specify the depth of the section, and press ENTER.
6 Proceed with creating the section, as described in Creating a 2D
or 3D Section on page 3233.
Creating and Editing a Live Section View
A live section view is a special view of a 3D model section.
A live section view is always applied to all objects in the drawing. Unlike a 2D
or 3D section, you do not choose a selection set of objects to be contained in
the section. All objects are contained in the live section view. Their display
properties are determined by whether or not they are situated within the
bounding box of the section line.
The objects contained in the live section view are not converted into a section
object, but are retained as objects in the drawing. They keep all of their
properties and display components, and can be edited. The area of objects
that lie outside of the section line, or objects that lie completely outside of
the section line, can be displayed or hidden. The appearance of these objects,
and of parts of objects outside of the section line, is controlled by the Sectioned
Body component. When you render a live section, you can show the outside
part as a half-transparent addition, for example.
The live section view can be turned on and off in a drawing.
Creating and Editing a Live Section View | 3237
Loading ...
Loading ...
Loading ...