Loading ...
Loading ...
Loading ...
4 Enter y (Yes) to erase the original spaces, or n (No) to leave the
spaces in the drawing.
Trimming an Extruded 3D Space
Use this procedure to trim an extruded 3D space with a trim line.
NOTE This procedure is valid for non-associative spaces only.
IMPORTANT If you are trimming a space with manual boundary offsets, verify
that the all boundaries are activated. Boundaries that are not activated are not
trimmed. For information about activating manual boundaries, see Activating
Manual Space Boundaries on page 2980.
Trimming an Extruded 3D Space | 3011
Loading ...
Loading ...
Loading ...