Loading ...
Loading ...
Loading ...
9 When adding or editing a block component, specify whether you
want to scale to fit the block component to the object by width,
depth, and height, or to lock the XY ratio:
Then…If you want to…
select Width.set the block scale to the width of
the object
select Depth.set the block scale to the depth of
the object
select Height.set the block scale to the height of
the object
select Lock to XY Ratio.scale the whole block equally, so
that one direction is scaled to fit
another of the scale criteria
clear all options under Scale to Fit.scale the block to its original size
10 Specify whether to mirror the block in the X,Y, or Z direction:
Then…If you want to create a mirror
of the block…
select Mirror X.in the X direction
select Mirror Y.in the Y direction
select Mirror Z.in the Z direction
11 Specify the X, Y, and Z locations of the insertion point.
12 Specify an insertion offset of the block in the X, Y, and Z directions.
13 Click OK twice.
Specifying the Display of Fill Type for an Opening
Use this procedure to specify the type of fill to display for an opening in display
representations used in the Top view (plan view) of a drawing.
1 Double-click the opening.
2 Click the Display tab.
2064 | Chapter 26 Openings
Loading ...
Loading ...
Loading ...