Loading ...
Loading ...
Loading ...
Then …If you add a cut plane …
objects are displayed using the
properties specified for the Above
at a height that is higher than the
value for Cut Plane Height
Cut Plane component on the Lay-
er/Color/Linetype tab.
You can click Remove to delete a cut plane that you added.
12 Click OK.
Specifying the Display of Other Characteristics of a Wall Style
Use this procedure to specify other display properties for the wall style, such
as whether to display complex endcaps, to show door and window frames, or
whether to show the miter of specific wall components. These display
properties apply only to display representations, such as Plan, that are used
in the Top view (plan view) of a drawing.
1 Click Manage tab ➤ Style & Display panel ➤ Style Manager .
2 Expand Architectural Objects, and expand Wall Styles.
3 Select the wall style that you want to change.
4 Click the Display Properties tab.
5 Select the display representation where you want the changes to
appear, and select Style Override.
6 If necessary, click .
7 Click the Other tab.
8 Select the display properties for the wall style:
Then …If you want to …
select Display Inner Lines Above.
Clear this option if you do not want
to display these lines.
display the component lines within
the wall above the cut plane (for
example, through a window or
door in the wall)
select Display Inner Lines Below.
Clear this option if you do not want
to display these lines.
display the component lines within
the wall below the cut plane (for
example, through a window or
door in the wall)
1306 | Chapter 20 Walls
Loading ...
Loading ...
Loading ...