Loading ...
Loading ...
Loading ...
4 Specify the railing extension properties:
Then…If you want to…
under At Floor Levels, clear Use Stair
Landing Extension.
use values in this dialog box to
specify extensions
under Top of Entire Stair, enter val-
ues for Handrail and Guardrail. Se-
specify the length of the handrail
and guardrail at the top of an entire
stair lect + T next to the value to add the
tread length to the extension value.
under Bottom of Entire Stair, enter
values for Handrail and Guardrail.
specify the length of the handrail
and guardrail at the bottom of an
entire stair Select + T next to the value to add
the tread length to the extension
value.
5 If you want to undo your changes and revert to the values set in
the railing style, click Reset to Style Values.
6 Click OK.
Changing the Railing Extensions at Landings
Use this procedure to control the length of the handrail and guardrail
extensions at landings. If a bottom rail exists, it extends as far as the railing
above it.
NOTE If these settings are unavailable, they are controlled by the railing style.
You cannot modify them for individual railings.
1 Double-click the railing for which you want to change the
extensions.
2 On the Properties palette, click the Design tab, expand Basic, and
expand Dimensions.
3 Click the setting for Railing Extensions.
4 Specify the railing extension properties:
Then…If you want to…
clear Use Stair Landing Extension
under At Landings.
use values in this dialog box to
specify extensions
2320 | Chapter 28 Railings
Loading ...
Loading ...
Loading ...