AUTOCAD 2011 User Manual

Loading ...

4 For Shape, select Multi-landing.

5 Specify the turn type:

Then…If you want to…

select 1/2 landing for Turn type.create a flat landing with a user-

defined length where the stair run

turns

select 1/2 turn for Turn type.

NOTE These stairs must have

at least three segments and

each corner must turn in the

same direction.

create stairs with a user-defined

length where the stair run turns

with treads through the turn

select 1/4 landing for Turn type.

NOTE These stairs typically

have two or more flights joined

by square landings.

create a flat landing where the stair

turns, with the length of the land-

ing equal to the width of the stair

select 1/4 turn for Turn type.

NOTE These stairs may have

two or more segments, and

corners may turn in either direc-

tion.

create stairs having treads along the

entire length, with one or more

turns in any direction

6 Specify the vertical orientation of the stair:

Then…If you want to…

select Up for Vertical Orientation.draw the stair from this floor to the

floor above

select Down for Vertical Orienta-

tion.

draw the stair from this floor to the

floor below

7 Expand Dimensions.

Creating a Multi-Landing Stair with User-Specified Settings | 2087

Loading ...

User Manual - Page 2143