Loading ...
Loading ...
Loading ...
Gross Area (SpaceType_DIN C)
BoundaryAdjacent Spaces
Measure from outside face of wallNo adjacent space
Measured from outside face of wallAdjacent space not classified (unspecified)
Calculating Spaces Based on the SIS Standard
SIS is the area calculation standard for Sweden and is used with some variations
across all Scandinavian countries. The SIS standard included in AutoCAD
Architecture includes the subset of SIS rules described in the following sections:
Tenants/Units
When selecting the SIS area calculation standard in AutoCAD Architecture,
the zone style Unit Usage_SIS will automatically be created. This zone style
can be used to specify the usage of the spaces in the drawing. The calculation
of the usable boundary is dependent on whether the adjacent spaces are in
the same unit or not. The usable boundaries are created to the interior side of
the wall when the adjacent space is attached to another zone. If the adjacent
space is attached to the same zone, the usable boundary is offset 0.15m into
the wall.
Shafts
Shafts need to be classified as Shaft. (For more information, see Classifying a
Space According to an Area Calculation Standard on page 2976.) Shaft spaces
do not have usable boundaries. The usable area will report N/A. When a shaft
is in the same zone as its adjacent spaces, the usable boundaries of the adjacent
3170 | Chapter 39 Spaces
Loading ...
Loading ...
Loading ...