Loading ...
Loading ...
Loading ...
1 Double-click the section mark you want to change.
2 On the Properties palette, expand Advanced.
3 Click Attributes.
4 Select the existing attribute under Value, and enter the new
information to include in the bubble.
5 Click OK.
Changing the Location of a Section Line
Use this procedure to relocate a section line by changing the coordinate values
of its insertion point. The section line also has an orientation with respect to
the WCS or the current UCS. For example, if the top and bottom of the section
line are parallel to the XY plane, its normal is parallel to the Z axis. You can
change the orientation of the section line by aligning its normal with another
axis. You can also rotate the section line on its plane by changing the rotation
angle.
For information about the world coordinate system (WCS) and the user
coordinate system (UCS), see “Use Coordinates and Coordinate Systems” in
AutoCAD Help.
1 Double-click the section line you want to relocate.
2 On the Properties palette, click the Design tab, expand Basic, and
expand Location.
3 Click Additional Information.
4 Specify the location of the section line:
Then…If you want to…
enter new coordinate values under
Insertion Point.
relocate the section line
make the normal of the section line
parallel to the Z axis: under Normal,
locate the section line on the XY
plane
enter 1 for Z, and enter 0 for X
and Y.
make the normal of the section line
parallel to the X axis: under Normal,
locate the section line on the YZ
plane
enter 1 for X, and enter 0 for Y
and Z.
Changing the Location of a Section Line | 3231
Loading ...
Loading ...
Loading ...