Loading ...
Loading ...
Loading ...
7 Under Type, select if the grid line associated with the bay should
be labelled as primary grid line or secondary grid line. By default,
primary grid lines are chosen. (For more information about
primary and secondary grid lines, see Defining the Numbering
Scheme for Secondary Grid Lines on page 2748).
NOTE The Label column is a read-only column showing you the grid
label for the associated grid line. You can change the labeling of the
grid under Bubble Parameters below.
8 Proceed to the Left tab and add grid lines there with the same
method.
IMPORTANT For a regular grid that has the same grid line layout on
both sides (Top/Bottom), Left/Right), you do not need to make any
settings on the Right and Bottom tabs. By default the Top and Left
side settings are mirrored to the Bottom and Right sides, if they are
not separately defined.
9 If needed, set further properties for your grid:
â– Editing the List of Preconfigured Bay Sizes on page 2739
â– Defining the Display of Grid Numbering when Inserting the
Grid on page 2745
â– Defining the Numbering and Lettering Scheme for Grid
Bubbles on page 2747
â– Defining the Numbering Scheme for Secondary Grid Lines on
page 2748
2736 | Chapter 34 Grids
Loading ...
Loading ...
Loading ...