Loading ...
Loading ...
Loading ...
DescriptionProperty
single common template or define separate
DWT files as templates for each drawing type.
For an overview of the drawing types, see
Concepts of Drawing Management on page
291.
If the value of Use Common Model/View
Templates is Yes, the Common Model/View
Template property specifies the location of
the common template for elements con-
structs, and view drawings. To change this
value, click , select a different drawing
template, and click Open.
If the value of Use Common Model/View
Templates is No, these properties specify the
Element Template
Construct Template
location of the default template file. To
General View Tem-
plate
change any of these values, click , select
a different drawing template, and click Open.
Section/Elevation
View Templates
Detail View Template
Specifies the location of the default template
file for creating new sheets. To change this
Sheet Template
value, click , select a different drawing
template, and click Open.
If the sheet set is locked for the project, this
property is read only.
6 Click OK to return to the Project Browser.
Adding Detailed Information to Project Properties
Use this procedure to add detail information to a project.
Project details are user-defined information items that can be attached to a
project. Details might include contact information about contractors, legal
representatives, or others. You can also use project details to track changes
and improvements to the project.
322 | Chapter 6 Drawing Management
Loading ...
Loading ...
Loading ...