Loading ...
Loading ...
Loading ...
Viewing Curtain Wall Unit Start, End, Location, and Reverse Direction Grips
In Model view, the Location grip has three possible edit modes:
Edit Along XY Plane, Edit Along YZ Plane, and Edit Along ZX
Plane. Press CTRL to cycle between modes until you are in the
desired mode. The default edit mode is along the XY plane. In
Plan view, the Location grip is restricted to movement in one
plane.
3 Move the curtain wall unit to the desired location and click once,
or enter a value and press ENTER.
If you want to enter a specific value for the second direction in
any edit mode (for example, in the Y direction when editing along
the XY plane), press TAB to cycle to the second direction.
You can also lock the movement of the curtain wall unit along a
specific direction. If you enter a value for either of the dimension
directions in the current edit mode and then press TAB, the
movement of the curtain wall unit is constrained to the second
dimension direction. When editing along the XY plane, for
example, you can enter a value for X dimension, and then press
TAB. The X dimension is locked at that value, and movement of
the curtain wall unit is constrained to the Y dimension direction.
Using Grips to Edit Curtain Wall Units | 1657
Loading ...
Loading ...
Loading ...