Loading ...
Loading ...
Loading ...
9 To specify an offset for the grid,
then…if the orientation is…
specify an offset distance in Bottom
Offset or Top Offset.
horizontal
specify an offset distance in Start
Offset or End Offset.
vertical
TIP The frame width is calculated as part of the cell size. Therefore,
cells adjacent to the frame can appear to be a different size than the
other cells. If you do not want the frame width included in the cell
size, specify an offset for the grid that is equal to the frame width.
When you draw a door/window assembly using a fixed cell
dimension, there is often extra space between the last full-size
cell and the end of the door/window assembly.
For more information about grid offsets, see Specifying an Offset
for a Door and Window Assembly Grid on page 1703.
10 Adjust the cells to accommodate this extra space:
Then…If you want to…
select Auto-Adjust Cells, select Grow
for Cell Adjustment, and select the
add the space to grid cells
specific cells where the space is to
be added. You can select any com-
bination of Specific Cells.
select Auto-Adjust Cells, select
Shrink for Cell Adjustment, and se-
remove the space from grid cells
lect the specific cells where the
space is to be removed. You can
select any combination of Specific
Cells.
11 Click OK.
For information about assigning the division definition to a
specific grid in your door/window assembly, see Assigning a
Division to a Door and Window Assembly Grid on page 1730.
1698 | Chapter 22 Door and Window Assemblies
Loading ...
Loading ...
Loading ...