Loading ...
Loading ...
Loading ...
For information about moving individual space boundaries, see Changing the
Location of a Space Boundary on page 2989.
For more information about the WCS and the UCS, see “Use Coordinates and
Coordinate Systems” in AutoCAD Help.
1 Double-click the space you want to change.
2 On the Properties palette, expand Basic, and expand Location.
3 Click Additional information.
4 On the Location worksheet, specify the location of the space:
Then…If you want to…
enter new coordinate values for In-
sertion Point.
relocate the space
make the normal of the space paral-
lel to the Z axis: for Normal, enter
1 for Z, and enter 0 for X and Y.
locate the space on the XY plane
make the normal of the space paral-
lel to the X axis: for Normal, enter
1 for X and enter 0 for Y and Z.
locate the space on the YZ plane
make the normal of the space paral-
lel to the Y axis: for Normal, enter
1 for Y, and enter 0 for X and Z.
locate the space on the XZ plane
enter a new value for Rotation
Angle.
change the rotation of the space
5 Click OK.
Specifying the Decomposition Type for a Space
Use this procedure to specify the type of subentities into which a space is
decomposed and the type of AutoCAD entities into which the decomposed
space is converted when exploded.
1 Double-click the decomposed space.
2 On the Properties palette, click the Display tab.
3 Under the General category, for Display component, verify that
*NONE* is selected.
2962 | Chapter 39 Spaces
Loading ...
Loading ...
Loading ...