Loading ...
Loading ...
Loading ...
Then …If you want to …
select a different operation for Op-
eration:
change the operation used to apply
the body modifier to the slab or
roof slab component
â– Select Additive to add the body
modifier to the component.
â– Select Subtract to subtract the
shape of the body modifier
from the component.
â– Select Replace to replace the
component with the body
modifier.
select the body modifier, and click
, or right-click, and click Re-
move.
delete the body modifier from the
slab or roof slab component
click Description, enter text, and
press ENTER.
enter a description of the body
modifier
3 Click OK.
Restoring a Slab/Roof Slab Body Modifier to a Mass Element
Use this procedure to remove a body modifier from a slab or a roof slab and
add it to the drawing as a mass element. Restoring a body modifier to a mass
element enables you to modify the shape as a mass element and then add it
to the slab or roof slab again as a body modifier. You can also restore the body
modifier to a mass element while leaving the body modifier still applied to
the slab or roof slab. This is useful if you want to create other slabs or roof
slabs with the same shape.
If the object used to create the body modifier was a conventional mass element,
it is restored to that mass element. For example, a Gable mass element is
restored as a Gable mass element. However, if the body modifier was created
from another object, such as a structural member, or was edited using Boolean
operations or face editing commands, the body modifier is restored as a Free
Form mass element.
2452 | Chapter 30 Slabs and Roof Slabs
Loading ...
Loading ...
Loading ...