Loading ...
Loading ...
Loading ...
Creating a Frame or Mullion Override
Use this procedure to override an individual frame or mullion.
To exchange a frame or mullion, the new definition must already be defined
in the curtain wall style. For information on creating frames and mullions,
see Defining Curtain Wall Frames on page 1447 and Defining Curtain Wall
Mullions on page 1454.
1 Select the curtain wall on which you want to override an edge.
2 Click Curtain Wall tab ➤ Modify panel ➤ Frame/Mullion
drop-down ➤ Override Assignment.
3 Select the frame or mullion edge you want to override.
If you selected a frame edge, the Frame Assignment Override dialog
box is displayed.
If you selected a mullion, the Mullion Assignment Override dialog
box is displayed.
4 Create the override.
Then …If you want to …
select a new edge definition from
the list.
exchange the existing edge for an-
other
select Remove Edge.remove the frame or mullion edge
5 Click OK.
6 Specify where you want to save the curtain wall override.
Then …If you want to save the over-
ride …
no further steps are necessary. The
override is saved to the curtain wall.
only on this specific curtain wall
For information about how to re-
move an override from a curtain
wall, see Removing Curtain Wall
Overrides on page 1520.
select the curtain wall, and click
Curtain Wall tab ➤ Modify pan-
to a curtain wall style
el ➤ Design Rules drop-
down ➤ Transfer To Object.
1504 | Chapter 21 Curtain Walls
Loading ...
Loading ...
Loading ...