Loading ...
Loading ...
Loading ...
Then …If you want to …
enter different values for Start Miter
and End Miter.
change the miter angles at each
end of the wall
enter a value for Offset Within.offset the sweep within the wall
enter a value for Offset Vertical.vertically offset the sweep
click .
delete the sweep from the wall
component
5 Click OK.
Working with Wall Modifiers
Wall modifiers (also called plan modifiers) use the 2-dimensional (2D) geometry
of an open polyline to customize the shape of a wall or a wall component. To
use wall modifiers, you draw a polyline in the shape you need and create a
wall modifier style from the polyline. You can then add wall modifiers of that
style to any wall. A wall can have more than one wall modifier attached to it.
Placing a Wall Modifier on a Wall
You specify the placement of a wall modifier, including its vertical and
horizontal position and its depth. The wall modifier can be added at the drawn
size of the polyline or scaled to a specific size. The wall modifier is then
extruded vertically along the wall surface.
You can add the wall modifier to one or both sides of the wall. When you
select the face, you can also offset the wall modifier from the opposite face to
create a bump-out, such as for pipe chases or interior columns.
1254 | Chapter 20 Walls
Loading ...
Loading ...
Loading ...