Loading ...
Loading ...
Loading ...
A napkin sketch tool is located with the Helper Tools in the Stock
Tool catalog. For more information, see Content Browser Overview
on page 137.
2 Select a napkin sketch tool.
3 Select the objects to include in the napkin sketch, and press ENTER.
4 Enter a name for the block created of the napkin sketch.
5 Specify a line format for generating the napkin sketch geometry:
Then…If you want to…
select Tight.trace over objects once to create
the appearance of a more accurate
sketch
select Loose.trace over objects twice to create a
looser sketch
select Messy.trace over objects three times to
create a very loose sketch
6 Clear Extend Sketch Lines At Corners if you do not want the
extended lines to appear on the napkin sketch.
Extending sketch lines at corners
7 Under Intended Plot Scale, select the scale at which you intend
to plot the sketch, or select Other and enter a custom scale.
8 Click OK.
The napkin sketch geometry is generated and placed as a block
reference over the drawing objects that you selected. Use the Move
command to relocate the sketch block reference in the drawing,
or cut and paste it into a new drawing.
1112 | Chapter 18 Napkin Sketch
Loading ...
Loading ...
Loading ...