Loading ...
Loading ...
Loading ...
Then …If you want to …
wall base height, the wall justifica-
tion line, or the wall bottom.
enter a value for End Elevation Off-
set, and specify whether the offset
specifying the ending height of the
wall modifier
occurs from the wall top, the wall
base height, the wall justification
line, or the wall bottom.
Enter a negative offset value to specify a location toward the
ground.
8 Edit settings to control the size and placement of the modifier:
Then …If you want to …
select Use Drawn Size.place the modifier at the size it was
defined in the modifier style
clear Use Drawn Size, and enter
values for Length and Depth.
specify the length and the depth of
the modifier on the wall
select Mirror X.mirror the modifier in the X direc-
tion
select Mirror Y.mirror the modifier in the Y direc-
tion
select Measure to Center.measure the modifier to the center
of the wall
9 To mirror the modifier in the X direction, select Mirror X.
Working with Wall Modifiers | 1267
Loading ...
Loading ...
Loading ...