Loading ...
Loading ...
Loading ...
Then…If you want to…
enter a value for Floor thickness.specify a floor thickness
enter a value for Ceiling thickness.specify a ceiling thickness
enter the appropriate value for Height
above ceiling.
specify the distance between the
top of the space ceiling to the
top of the space
enter the appropriate value for Height
below floor.
specify the distance between the
bottom of the space floor and the
bottom of the space
enter a value for Default surface
height.
specify the combined height of
ceiling height, ceiling thickness,
and height above ceiling
22 Select one of the following options for Justification to specify the
vertical position of the space insertion point relative to the space:
â– Top of floor
â– Bottom of floor
â– Bottom of space below floor (available only if the height of
the space below the floor is bigger than 0.)
Defining target dimensions in the space tool
23 Expand Actual Dimensions.
NOTE The settings for target dimensions of a space are visible only
if you have selected Insert as the Create type. Rectangular and
polygonal spaces do not observe target dimensions. The range of
values allowed here depends on the target dimensions defined in the
space style.
24 To specify the geometry of the space within the boundaries of the
target dimensions on screen, select Yes for Specify on Screen.
To specify the geometry of the space by entering values in the
Properties palette, select No for Specify on Screen.
Creating a Space Tool | 2959
Loading ...
Loading ...
Loading ...