Loading ...
Loading ...
Loading ...
2 On the Properties palette, click the Design tab, expand Basic, and
expand Dimensions.
3 Click the Vertical offset or Horizontal offset value, and enter a
new value.
Changing Slab or Roof Slab Edges
Use this procedure to access the Slab Edges or Roof Slab Edges worksheet from
the Properties palette.
1 Double-click the slab or roof slab whose edge(s) you want to
change.
2 On the Properties palette, click the Design tab, expand Basic, and
expand Dimensions.
3 Click next to Edges.
The Slab Edges and Roof Slab Edges worksheets are identical in
function to the Edit Slab Edges and Edit Roof Slab Edges
worksheets accessed from the slab or roof slab contextual tab. For
more information on using these worksheets, see Changing the
Edges of a Slab/Roof Slab on page 2426
4 Click OK.
Changing Slab/Roof Slab Slope Settings
Use this procedure to change the slope settings of a slab or roof slab, and to
specify whether the fascia is to be aligned when the slope is changed.
You can also control the adjustment of the overhang or baseline height of the
slab. This constraint applies only to the baseline edge, and it works only when
the baseline is horizontal.
1 Double-click the slab you want to change.
2 On the Properties palette, click the Design tab, expand
Dimensions, and expand Slope.
3 Enter a value for Rise, Run, or Angle to define the slope.
2422 | Chapter 30 Slabs and Roof Slabs
Loading ...
Loading ...
Loading ...