Loading ...
Loading ...
Loading ...
Specifying the Hatching for Components of a Door and Window
Assembly Style
Use this procedure to specify the hatching of the components of an individual
door/window assembly. Door/window assembly hatching is displayed only
in display representations, such as Plan, that are used in the Top view (Plan
view) of a drawing.
1 Click Manage tab ➤ Style & Display panel ➤ Style Manager .
2 Expand Architectural Objects, and expand Door/Window
Assembly Styles.
NOTE Alternatively, select a door/window assembly in the drawing,
and click Door/Window Assembly tab ➤ General panel ➤ Edit Style
drop-down ➤ Door/Window Assembly Styles .
3 Select the door/window assembly style that you want to change.
4 Click the Display Properties tab.
5 Select the display representation where you want the changes to
appear, and click Style Override.
6 Click the Hatching tab.
7 Select a component, and click the setting for Pattern.
8 Select the hatching for the component:
Then…If you want to select…
select Predefined for Type, and then
select a pattern.
a hatching pattern that is available
in the software
select Custom for Type, and then
enter the name of the custom pat-
a custom pattern
tern. If necessary, click Browse, and
navigate to the folder where the
custom pattern file is located.
select User-defined for Type, and
clear Double Hatch.
single hatching
select User-defined for Type, and
select Double Hatch.
double hatching
Door and Window Assembly Styles | 1757
Loading ...
Loading ...
Loading ...