Loading ...
Loading ...
Loading ...
7 If you are placing the opening in a wall, specify the opening
position:
Then…If you want to…
select Offset/Center for Position
along wall, and enter a value for
Automatic offset.
position the edge of the opening at
a specific distance from the end of
a wall segment
select Offset/Center for Position
along wall, and specify a point near
the center of the wall segment.
center the opening on a wall seg-
ment
select Unconstrained for Position
along wall.
position the opening anywhere
along the wall
8 Specify whether you want the opening to be aligned vertically by
sill height or by head height:
Then…If you want to…
select Sill for Vertical alignment, and
enter a value for Sill height.
align the opening by sill height
select Head for Vertical alignment,
and enter a value for Head height.
align the opening by head height
9 Specify the insertion point for an opening in a wall or for a
freestanding opening:
Then…If you want to…
select the wall, and specify an inser-
tion point along the wall.
place an opening in a wall
press ENTER, and specify an inser-
tion point and rotation angle for
the opening.
place a freestanding opening
10 Continue to place openings, and press ENTER.
2036 | Chapter 26 Openings
Loading ...
Loading ...
Loading ...