Loading ...
Loading ...
Loading ...
2 Select the desired mode, and press ENTER.
â– If you are changing a layout grid with manually spaced lines
to a grid with lines placed at a fixed repeated spacing value,
you are prompted for start and end offsets, and the distance
between the lines. If there are too few lines on the grid to fill
it according to your specifications, new lines are created.
â– If you are changing a layout grid with manually spaced lines
to a grid with evenly spaced lines, you are prompted for start
and end offsets for the grid. The existing lines are distributed
evenly on the grid.
â– If you are changing a layout grid with lines placed at a fixed
repeated spacing value to a grid with manually spaced lines,
there is no visible change, but the lines have been converted
to manual lines, so that you now can add lines to and remove
lines from the grid.
â– If you are changing a layout grid with lines placed at a fixed
repeated spacing value to a grid with evenly spaced lines, you
are prompted for start and end offsets. The existing lines are
then recalculated and distributed evenly. You can now add
lines to and remove lines from the grid.
â– If you are changing a grid with evenly spaced lines to a grid
with manually spaced lines, there is no visible change.
However, if you change the grid, the lines remain fixed and
are not distributed evenly anymore.
â– If you are changing a grid with evenly spaced lines to a grid
with lines placed at a fixed repeated spacing value, you are
prompted for start and end offsets, and the distance between
the lines. If there are too few lines on the grid to fill the grid
according to your specifications, new lines are created.
Changing the Display Properties of Layout Grids
Use this procedure to change any of the following display properties of the
nodes on a layout grid:
â– Visibility (display component is on or off)
â– Layer
Changing the Display Properties of Layout Grids | 2705
Loading ...
Loading ...
Loading ...