Loading ...
Loading ...
Loading ...
TIP You can also access commands to change the position of the
anchored object from the context menu. Select the anchored object,
right-click, and click Curve Anchor. From the submenu, choose the
desired command to manipulate the anchored object in relation to
its anchoring curve.
3 Click Anchor.
4 Change the position along the X axis:
Then…If you want to…
select Start of curve, Midpoint of
curve, or End of curve for From.
change the X reference point on
the curve
enter a value for Distance.specify the X distance between the
reference point on the curve and
the anchored object
select Start edge of object, Center
of object, or End edge of object for
To.
select from which point on the
anchored object the X distance to
the curve is measured
5 Change the position along the Y axis:
Then…If you want to…
select Left edge of curve width,
Center of curve width, or Right
edge of curve width for From.
change the Y reference point on the
curve
enter a value for Distance.specify the Y distance between the
reference point on the curve and
the anchored object
select Front of object, Center of
object, or Back of object for To.
select from which point on the
anchored object the Y distance to
the curve is measured
6 Change the position along the Z axis (vertical):
Then…If you want to…
select Bottom of curve height,
Center of curve height, or Top of
curve height for From.
change the Z reference point on the
curve
Changing the Position of Objects Anchored to Curves | 2655
Loading ...
Loading ...
Loading ...