Loading ...
Loading ...
Loading ...
DescriptionSpace TypeProperty
Specifies the ceiling height of the space.
NOTE This height is calculated from the top
of the floor to the bottom of the ceiling. You
can define additional floor and ceiling thick-
ness.
3D spacesCeiling height
Specifies the thickness of the floor.
If the floor thickness is set to 0, no floor is
displayed.
3D spacesFloor thickness
Specifies the thickness of the ceiling.
If the ceiling thickness is set to 0, no ceiling
is displayed.
3D spacesCeiling thickness
Specifies the distance between the top of the
space ceiling to the top of the space.
3D spacesHeight above ceiling
Specifies the distance between the bottom of
the space floor and the bottom of the space.
3D spacesHeight below floor
Specifies the combined height of ceiling
height, ceiling thickness, and height above
ceiling.
3D spacesDefault surface height
Specifies the relative vertical position of the
space insertion point on the space as one of
the following:
Extruded 3D
spaces
Justification
â– Top of floor
â– Bottom of floor
â– Bottom of space below floor (available
only if the height of the space below the
floor is greater than 0.)
3D freeform spaces are always justified to the
top of floor.
Actual Dimensions
Category
Specifies the length of the space.AllLength
Space Properties | 2901
Loading ...
Loading ...
Loading ...