Loading ...
Loading ...
Loading ...
the dimension layer can enhance drawing performance, especially for big
drawings.
You can add new AEC dimensions even when the layer is frozen. However,
you can edit them only after the layer has been thawed again.
Changing the Text Height of Superscripted Numbers
How can I change the text height of superscripted numbers in an AEC
dimension?
By default, the text height of superscripted numbers in AEC dimensions is set
to 50 percent of the text height of the underlying AutoCAD dimension style
(DIMTXT). To change this default, you must change the corresponding value
in the Registry file.
WARNING Making changes in the Registry file can have far-reaching consequences
for the whole application. Before you change anything here, make sure that this
is what you really want to do. If you are not sure, consult your CAD manager or
IT department.
1 Open the Windows Registry Editor.
2 Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Autodesk\AutoCAD\R18.0\ACAD-8004:409\AEC\6.0\AecArchDACHBase60\ObjectDefaults\AEC
Dimension\SuperscriptScaleFactor.
3 Enter the desired value. The value here is relative to the AutoCAD
dimension text height (DIMTXT).
Fixing the Error Symbol
The AEC dimension for a wall 1 meter high is displayed only with an error
symbol. How can I get a correct dimension display?
The cut plane of the AEC dimension is taken from the cut plane of the
dimensioned wall in the current display configuration. If the cut plane is set
to a higher value, you must change it to include the lower wall into the
dimension. For information on setting the wall cut plane, see Specifying the
Cut Plane Display of a Wall Style on page 1305.
Changing the Text Height of Superscripted Numbers | 3431
Loading ...
Loading ...
Loading ...