Loading ...
Loading ...
Loading ...
Material Component2D Section Component
2D Section/Elevation Linework or 3D Body.
For information on switching between
Subdivision 1-10
these material components, see Use the
3D Body Component of a Material for the
2D Section Linework on page 3275.
Defining Line
The defining line determines where the section cuts the objects it contains.
The material component which controls the display of the Defining Line is
the Linework component. The defining line is a display component of both
2D and 3D section objects.
For example, if you cut a brick wall that contains a window, you can specify
one uniform color for the defining line, or use different colors where the
section line cuts the wall and where it cuts the window. If you want to use a
uniform color for the Defining Line component, assign a color to it and do
not use the properties of the material. If you want the color of the defining
line to be influenced by the objects in the section, use the material properties.
In the case of a section through a brick wall with a window, you might use a
red defining line where the wall is cut and a blue defining line where the
window is cut.
Specifying cut line colors for different materials
Shrinkwrap
The shrinkwrap displays the union of all object faces cut by the section line.
The Outer Shrinkwrap component represents the outline of solid, filled
components, such as a wall shrinkwrap. The Inner Shrinkwrap component
3270 | Chapter 40 Sections
Loading ...
Loading ...
Loading ...