Loading ...
Loading ...
Loading ...
Surface Components
Use this procedure to insert rectangular detail components of a specific depth
that have a hatch, such as base courses. In this example, the tool for inserting
the base course has the View property set to Section, which is the only view
available for this type of component.
1 Activate the detail component insertion tool for the component
using any of the methods described under Inserting Detail
Components on page 3490.
2 Specify a start point in the drawing area to insert the component
at the default orientation, or select one of the following options:
Then…If you want to…
enter x (for Xflip), and then click to specify the
starting point for the component.
flip the component
along its X axis
enter y (for Yflip), and then click to specify the
starting point for the component.
flip the component
along its Y axis
enter l (for Left), and then click to specify the
starting point for the component.
position the compon-
ent to the left of the
baseline when drawn
vertically
enter r (for Right), and then click to specify the
starting point for the component.
position the compon-
ent to the right of the
baseline when drawn
vertically
enter c (for Center), and then click to specify the
starting point for the component.
center the component
on the baseline when
drawn in any direction
3 Click the desired endpoint to insert the component.
3498 | Chapter 46 Detail Components
Loading ...
Loading ...
Loading ...