Loading ...
Loading ...
Loading ...
5 Click in the drawing, not on the stair, to remove the selection.
6 Select the space to intersect, and click Space tab ➤ Modify
panel ➤ Interference Condition drop-down ➤ Add .
7 Select the stair, and press ENTER.
NOTE Changing the Interference values of the stair changes the size
of the intersection with the space.
Removing a Stair Interference Condition from a Space
Use this procedure to remove a stair interference from a space.
1 Select the space from which to remove the interference, and click
Space tab ➤ Modify panel ➤ Interference Condition
drop-down ➤ Remove .
2 Select the stair, and press ENTER.
Creating an Interference Condition in a Curtain Wall
Use this procedure to create a stair interference area in a curtain wall. When
you add an interference condition between a stair and a curtain wall, a box
is cut out around the stair based on the specified headroom height and left
and right side clearances for straight and multi-landing stairs or inside and
outside clearances for spiral and U-shaped stairs. You have the option of cutting
the infills, frames and mullions of the curtain wall.
Stair Interference Conditions | 2215
Loading ...
Loading ...
Loading ...