Loading ...
Loading ...
Loading ...
The mass element is in in-place edit mode. Each face of the Free
Form mass element is available to edit in this mode.
4 Select the Face grip for the face of the mass element to edit.
Depending on the original shape of the mass element, Edge and
Vertex grips are displayed.
5 Click and drag the Face grip to specify the new location.
6 Press ESC, or right-click and click Deselect All to exit the editing
session.
NOTE You cannot pull the mass element face at such an angle, either
horizontally or vertically, that the adjacent faces become non-planar.
If this distorted condition occurs, the mass element face automatically
returns to its original position and an error message is displayed on
the command line.
Moving a mass element orthogonally while stretching adjacent faces
The face of the Free Form mass element is moved orthogonally
and its geometry remains unchanged, while its adjacent faces are
stretched and tilted.
Moving a Mass Element Face Freely While Stretching Adjacent Faces
1 Select the mass element you want to edit.
1030 | Chapter 15 Creating Conceptual Models
Loading ...
Loading ...
Loading ...