Loading ...
Loading ...
Loading ...
The objects are cut at this height when you create or update an
elevation.
6 Right-click, and click Deselect All to turn off grips.
To update an elevation created from this elevation line, see Updating a 2D or
3D Elevation on page 3326.
Changing the Lower Extension of an Elevation Using Grips
Use this procedure to change the lower extension of any elevation connected
to the elevation line. You can change the lower extension of the elevation
line before or after you create a connected elevation. If you change the lower
extension after creating the elevation, you need to update the elevation to
show the changes.
You can also change the lower extension of an elevation using the Properties
palette.
1 On the floating View panel, click View drop-down ➤ SW isometric
.
2 Select the elevation line you want to change.
3 Select the Model Extents grip to turn off model extents for height
mode.
If you use model extents, the default for the lower elevation is 1
foot below the XY plane.
4 Select the Lower Extension grip.
3296 | Chapter 41 Elevations
Loading ...
Loading ...
Loading ...