Loading ...
Loading ...
Loading ...
If Model is the current display representation, the tab is called
Other.
6 Click Add.
7 Select Infill, Frame, or Mullion for Component Type.
8 Select the specific element from the list.
9 Select Draw Custom Graphics.
10 Specify the display of the component:
Then …If you want to …
select Replace Graphics.display the block instead of the as-
sociated curtain wall unit element
clear Replace Graphics.superimpose the block over the
curtain wall unit element so that
both are displayed
11 Click Select Block, and select the custom block that you created.
12 Click OK.
13 Specify further settings for the custom display block:
Then …If you want to …
select Width, Height, or Depth. To
prevent the block from losing its
proportions, select Lock XY Ratio.
scale the block to fit a particular di-
mension
specify an insertion point on the X,
Y, and Z planes.
specify how the block is inserted
into the grid in the X, Y, and Z dir-
ections
determine if it should mirror in the
X, Y, or Z direction.
mirror the block
specify the offset in the X, Y, or Z
direction.
offset the block from the grid
14 Click OK three times.
1622 | Chapter 21 Curtain Walls
Loading ...
Loading ...
Loading ...