Loading ...
Loading ...
Loading ...
Move edge - maintain slope
As you move the Edge grip inward or outward in the current plane,
adjacent edges stretch or shorten according to the direction of
the move. The distance between the endpoints of the arc changes,
but the degree of arc is maintained.
Add new edges - maintain slope
As you move the Edge grip outward in its current plane, rather
than adjacent edges being stretched or reoriented, new edges are
added, each with its own Edge and Edge Overhang grips. The
degree of arc and the distance between the arc endpoints are both
maintained.
Covert to line - maintain slope
When you click, the curved edge is converted to a straight line
between the endpoints of the arc. Adjacent edges are not affected.
Offset all edges - maintain slope
All outside perimeter edges move inward or outward in the current
plane the same distance as you move the selected Edge grip. The
degree of arc is maintained. If holes have been added to the slab
or roof slab, their edges are unaffected.
Using Slab/Roof Slab Edge Overhang Grips
Use this procedure to change the overhang of a slab or roof slab edge. (You
can also change the overhang using the worksheet available from the object’ s
Properties palette or its contextual ribbon tab. For more information, see
Changing the Edges of a Slab/Roof Slab on page 2426.)
1 Select the slab or roof slab.
2 Select an Edge Overhang grip.
3 Enter a value to specify the desired overhang distance, or move
the grip until the desired value is displayed.
Using Grips to Edit Slabs/Roof Slabs | 2411
Loading ...
Loading ...
Loading ...