Loading ...
Loading ...
Loading ...
7 Click the Layer/Color/Linetype tab.
8 Select By Material for any component to which you want to assign
a material, and click OK.
If the setting for By Material is not available, the display of this
component cannot be determined by a material.
9 Click the Materials tab.
10 Select the component you want to change, select the value for
Material Definition, and select a different material definition.
You can select any material definition in the current drawing, or
click to create a new material definition and assign it to a
component.
WARNING Although you can edit a material definition from this
dialog box, any changes you make to the material definition apply
to all objects that are assigned the material.
11 Click OK.
Specifying the Display of Curtain Wall Units
The display of a curtain wall unit depends on the direction from which you
view the curtain wall unit. In Plan view, the curtain wall unit is displayed as
parallel lines with vertices marking the grid lines, as an architect would
typically draw a curtain wall unit. In 3D isometric views, the curtain wall unit
is displayed as it would appear in the real world, with surfaces showing length,
thickness, and height. You control what you want to display in each particular
view.
Element Definitions and Custom Display Components
By default, the display of all infills, frames, and mullions are controlled by
the display properties of the default infill, default frame, and default mullions.
However, you can add individual element definitions as components with
separate display properties. For example, if you define two infills called stone
panel and acetylene panel, by default they are both controlled by the same
default infill display properties. However, you can add each definition as a
new display component and control the display properties separately.
Specifying the Display of Curtain Wall Units | 1617
Loading ...
Loading ...
Loading ...