Loading ...
Loading ...
Loading ...
5 In the left pane, select Infills under Element Definitions.
6 Click New Infill.
7 Enter a descriptive name for the infill.
8 Specify an alignment for the infill.
For more information, see Specifying an Alignment for a Curtain
Wall Unit Infill on page 1581.
9 Specify an offset for the infill.
For more information, see Specifying an Offset for a Curtain Wall
Unit Infill on page 1582.
10 Specify a thickness for the panel.
Specifying infill panel thickness
11 Click OK.
After you create an infill definition, you can assign it to any cell in a curtain
wall unit grid. For more information, see Assigning Infills to Curtain Wall
Unit Cells on page 1598.
Specifying an Alignment for a Curtain Wall Unit Infill
Use this procedure to align an infill so that it is centered with the baseline of
the curtain wall unit, in front of the baseline, or behind the baseline. In Plan
view, the front of a curtain wall unit (drawn from left to right) is below the
baseline and the back is above the baseline.
NOTE To move the infill away from the baseline, see Specifying an Offset for a
Curtain Wall Unit Infill on page 1582.
Defining Infills for Curtain Wall Unit Cells | 1581
Loading ...
Loading ...
Loading ...