Loading ...
Loading ...
Loading ...
View Elevation Grips in Plan View
3 Move the grip until the length value you want is displayed, and
click once.
The entire elevation boundary length is updated.
4 To change the length of side 1 of the elevation boundary, click
the Side 1 Endpoint grip.
Side 1 starts from the first point specified for the elevation line.
5 Move the grip to the desired location, and click once; or enter a
value on the command line, and press ENTER.
6 To change the length of side 2 of the elevation boundary, click
the Side 2 Endpoint grip.
Side 2 starts from the endpoint of the elevation line.
7 Move the grip to the desired location, and click once; or enter a
value on the command line, and press ENTER.
8 Right-click, and click Deselect All to turn off grips.
To update an elevation created from this elevation line, see Updating a 2D or
3D Elevation on page 3326.
Changing the Angle Dimensions of an Elevation
Use this procedure to change the angle of the sides of the building elevation
boundary. You can change the angle dimensions before or after you create a
connected elevation. If you change the angles after creating the elevation,
you need to update the elevation to show the changes.
1 Double-click the elevation line you want to change.
3298 | Chapter 41 Elevations
Loading ...
Loading ...
Loading ...