Loading ...
Loading ...
Loading ...
2 Click Mass Group tab ➤ Modify panel ➤ Reposition Insertion
Point .
3 Specify the new insertion point.
4 Enter a rotation angle, and press ENTER; or move the cursor, and
click to specify the rotation.
If the mass group has an entity reference connected to it,
repositioning the insertion point of the mass group affects the
rotation of the entity reference.
Specifying the Cut Plane Display of a Mass Group
Use this procedure to specify the properties of one or more cut planes for a
mass group. Cut plane display properties apply only to display representations,
such as Plan, that are used in the Top view (plan view) of a drawing.
1 Double-click the mass group you want to change.
2 On the Properties palette, click the Display tab.
3 Under the General category, for Display component, verify that
*NONE* is selected.
4 For Display controlled by, select This object.
NOTE To apply your changes to all mass groups in the drawing,
select Drawing default setting.
5 If necessary, expand Object Display Properties ➤ Cut Plane.
6 For Override cut plane, specify whether you want to override the
global cut plane defined for the current display configuration.
Using Massing Tools to Create Mass Groups | 1065
Loading ...
Loading ...
Loading ...