Loading ...
Loading ...
Loading ...
Stair display components at roof level
21 Only the down display components below the roof level are
displayed.
Changing the Display of an Overlapping Stair
Use this procedure to create an overlapping stair and set the display properties
to view the overlapped section correctly. For this example, we will display all
components of the stair above the overlap section outlined in red.
To set the stair display, the Plan Overlapping display representation needs to
be turned on and specific components need to be set. For overlapping stairs,
in addition to the usual up and down groups, four other groups of display
components are available in Plan Overlapping.
DefinitionDisplay representation group
Stair components below the cut height that
are above the overlap section
“components” up (above overlap)
Stair components above the cut height that
are above the overlap section
“components” down (above overlap)
Stair components below the cut height that
are below the overlap section
“components” up (below overlap)
Stair components above the cut height that
are below the overlap section
“components” down (below overlap)
1 Open the tool palette that you want to use, and select a stair tool.
If necessary, scroll to display the tool that you want to use.
Changing the Display of an Overlapping Stair | 2233
Loading ...
Loading ...
Loading ...