Loading ...
Loading ...
Loading ...
Specifying the Display of Custom Block Components of a Window
Use this procedure to specify the display of custom block components for an
individual window in a particular display representation. If you are going to
use custom graphics for a new component, draw the component and save it
as a block before you start this procedure.
1 Double-click the window.
2 Click the Display tab.
3 Under the General category, for Display component, verify that
*NONE* is selected.
4 For Display controlled by, select This object.
NOTE To apply your changes to all windows in the drawing, select
Drawing default setting. To apply changes to all windows of this style,
select Window Style:<style name>. For more information on styles,
see Window Styles on page 1980.
5 For Display representation, verify that the desired display
representation is selected.
6 If necessary, expand Object Display Properties ➤ Advanced, and
for Custom block display, click (the number in parentheses
indicates the number of blocks currently attached to the window).
7 If you want to turn off the display of custom blocks for this
window without removing them, select Disable Custom Blocks.
8 Specify whether to add, edit, or remove a block component:
Then…If you want to…
click Add, and then click Select
Block, select the block, and click
OK.
add a new block component
select the component to edit, and
click Edit.
edit an existing block component
select the block, click Remove, and
click OK.
remove an existing block compon-
ent
Specifying the Display of Custom Block Components of a Window | 1977
Loading ...
Loading ...
Loading ...