Loading ...
Loading ...
Loading ...
1 Select the opening to array.
2 Click Opening tab ➤ Modify panel ➤ Array .
3 Select an edge from which to start the array that is perpendicular
to the array axis, then drag along your wall in the direction of
the array. Do one of the following:
â– Offset: start the opening array a specified offset distance from
the edge.
â– Clear Distance: specify a clear distance between each arrayed
opening.
â– Pick Array Distance: specify a distance between arrayed
openings.
â– Enter Count: specify the number of openings to appear in the
array.
Alternatively, you can press ENTER and then specify two points
between which to array the opening.
Repositioning an Opening with Modify Tools
Use this procedure to reposition an opening.
1 Select the opening to reposition.
2 Click Opening tab ➤ Modify panel ➤ Reposition From .
3 Select an existing wall edge from which to reposition the opening,
or specify two points to define a reference edge.
Spacing Openings Evenly with Modify Tools
Use this procedure to space openings evenly along a wall.
1 Select the opening to space evenly.
2 Click Opening tab ➤ Modify panel ➤ Space Evenly .
3 Select an edge as the axis along which to space all the openings
evenly, and specify a start point and an endpoint along the edge.
Alternatively, press ENTER and specify two points between which
the openings will be spaced evenly from each other.
2060 | Chapter 26 Openings
Loading ...
Loading ...
Loading ...