Loading ...
Loading ...
Loading ...
You can select any material definition in the current drawing, or
click to create a new material definition and assign it to a
component.
WARNING Although you can edit a material definition from this
dialog box, any changes you make to the material definition apply
to all objects that are assigned the material.
6 Click OK twice.
Changing the Size of the Mass Group Marker
Use this procedure to change the size of the mass group marker by editing its
display properties.
1 Double-click the mass group you want to change.
2 On the Properties palette, click the Display tab.
3 Under the General category, for Display component, verify that
*NONE* is selected.
4 For Display controlled by, select This object.
NOTE To apply your changes to all mass groups in the drawing,
select Drawing default setting.
5 If necessary, expand Object Display Properties ➤ Advanced.
6 Click the value for Marker size, and enter a new value.
(Alternatively, you can click and specify 2 points in the
drawing area to set the new size.)
You can also access and modify the marker size property through the mass
group’s context menu, as follows
1 Select the mass group, right-click, and click Edit Object Display.
2 In the Object Display dialog, click the Display Properties tab.
3 Select the display representation where you want the changes to
appear, and select Object Override.
The display representation in bold is the current display
representation.
4 If necessary, click .
Using Massing Tools to Create Mass Groups | 1055
Loading ...
Loading ...
Loading ...