Loading ...
Loading ...
Loading ...
NOTE To have the converging point on the edge of the stair, you
must clear the Use Riser Lines setting. For more information about
this setting, see Specifying the Stair Winder Style Settings on page
2272.
6 When you have finished removing treads, you can click the Exit
Edit Turns grip to return to the default stair edit mode, or
right-click and click Deselect All to turn off grips.
Adding a Tread to a Winder Turn
Use this procedure to add a tread to a winder turn.
The winders within the turn zone are set to an angle converging on the Turn
Center grip.
1 Select a 1/2 turn or 1/4 turn stair.
2 If the Winder Style is balanced, select the circular Edit Turns trigger
grip. The Select Winder Style dialog box is displayed.
NOTE Only the winder styles present in the drawing are displayed.
Select Winder Style dialog box
3 Select a Single Point style from the list, and click OK.
2190 | Chapter 27 Stairs
Loading ...
Loading ...
Loading ...