Loading ...
Loading ...
Loading ...
DescriptionCategory/Property
This setting defines the width of the poly-
line segment at the start of the selected
vertex.
Geometry/Start segment width
This setting defines the width of the poly-
line segment at the end of the selected
vertex.
Geometry/End segment width
Here, you can enter a global width for the
overall polyline. By default the line width
setting defined in the tool is used.
Geometry/Global width
This setting specifies the elevation of the
polyline relative to the z-axis of the poly-
Geometry/Elevation
line’ s object coordinate system. Annotation
symbols are by default inserted at elevation
0.
This value is set only if the polyline has
been set to have a width.
Geometry/Area
This value displays the overall length of the
polyline.
Geometry/Length
This setting displays whether the polyline
in the annotation symbol is closed or open.
Misc/Closed
Typically, fire rating lines and match lines
are open polylines; a revision cloud is a
closed polyline.
This setting allows you to use a smaller
linetype scale than the regular selected
Misc/Linetype generation
linetype scale on very short polyline seg-
ments. This can be useful when the line-
type has a pattern (for example dashed)
and certain segments are too short to dis-
play the pattern. In this case, enabling
linetype generation generates the pattern
on those segments with a scale small
enough to display.
3636 | Chapter 47 Annotation and Keynoting Tools
Loading ...
Loading ...
Loading ...