Loading ...
Loading ...
Loading ...
1 Select the curtain wall unit you want to change, right-click, and
click Edit Object Display.
2 In the Object Display dialog, click the Display Properties tab.
The current display representation is displayed in bold.
3 Select the display representation where you want the changes to
appear, and select Object Override. If Object Override is already
selected, click at the upper-right corner of the tab.
4 In the Display Properties dialog, click the Cut Plane tab, and then
change the settings as needed.
5 Click OK twice.
Specifying the Display of Other Characteristics of a Curtain Wall
Unit
Use this procedure to specify other display properties for a curtain wall unit,
including cell marker size, the display of miters at frame corners, and the
display of custom components. If you are going to use custom graphics for a
component, draw the component and save it as a block before you start this
procedure.
1 Double-click the curtain wall unit.
2 Click the Display tab.
3 Under the General category, for Display component, verify that
*NONE* is selected.
4 For Display controlled by, select This object.
NOTE To apply your changes to all curtain wall units in the drawing,
select Drawing default setting. To apply changes to all curtain wall
units of this style, select Curtain Wall Unit Style:<style name>. For
more information on styles, see Curtain Wall Styles on page 1422.
5 If necessary, expand Object Display Properties ➤ Advanced.
6 If you want to change the size of the markers used for cells in the
curtain wall grid, click Cell marker size, and enter a new value.
(Alternatively, you can click and specify 2 points in the
drawing area to set the new size.)
7 Optionally, for Show mitres at frame corners, select Yes/No.
1666 | Chapter 21 Curtain Walls
Loading ...
Loading ...
Loading ...